Five operation points of Jiangmen spraying process
1. Before spraying and processing hardware products, the spraying factory needs to clean up the spraying address. Impurities are not allowed to appear in the process of spraying, and the surface of products should be kept intact and clean.
2. In the process of spraying, only hardware
The surface should be decorated with one layer, and it is not allowed to spray too thick.
This will lead to paint too thick, color deformation phenomenon, which is not conducive to the normal use.
3. The uniformity of the paint should be ensured during spraying, and the paint should be mixed before spraying, so that the paint can be fully combined, and the upper layer of the paint will not be lighter and the lower part will be turbid.
4. In the process of spraying, if the paint is too viscous, additives can be used in the spraying process. The spraying plant should distribute the paint according to the relevant proportion, and the imbalance of proportion is not allowed.
5. Pay attention to the spraying process to ensure the satisfactory and even spraying. The phenomenon of different thickness is not allowed. For the paint with different thickness, the overall aesthetics will be affected after spraying, which will cause visual disharmony.
Article origin: Jiangmen spraying processing factory
-
07-22
Preparation and routine maintenance before using coating equipment
Before coating construction, the operator should know what preparation and daily protection should be done, otherwise the equipment will be damaged. Preparation before painting Before the coating
-
07-22
How to deal with the phenomenon that powder coating does not produce powder
1、 There are other impurities in the powder coating 2、 If the spray gun and powder feeder are not cleaned up for a long time, there is powder sticking on the nozzle end, and the powder outlet of the spray gun is blocked by the loose head 3、 The powder itself is damp and caking 4、 During construction, the air pressure is too low 5、 The solenoid valve doesn't work and there is no powder injection pressure output 6、 The powder conveying pipe connecting the spray gun is bent and may fa
-
07-22
Characteristics of Jiangmen spraying equipment
The smaller the resistivity of the powder, the easier the powder particles to release charge, the less adsorption force and easy to fall off. Therefore, the higher the resistivity of the powder, the
-
07-22
Advantages of Jiangmen powder coatings
1. Excellent film function The coating has metallic luster, brilliant multicolor effect and outstanding protection function, which provides colorful appearance decoration for industrial products su